Instant torque for towing and offroading, screaming top-end for the street Unleash the true potential of your GM Truck with Magnuson’s TVS2300 Supercharger Kit. The industry’s first supercharger kit for the 2014-2018 GM Sierra / Silverado 1500 L83 5.3L V8 (Direct Injection), this bolt on supercharger is designed to deliver maximum performance while retaining factory-like drivability and reliability. Generating 6 psi of boost, the Magnuson Supercharger delivers power gains of approximately 105 horsepower and 105 lb-ft of torque at the rear wheels, for a total of 416 hp and 444 lb-ft at the wheels! But peak horsepower and torque numbers don’t tell the whole story. “Under the curve” power is significantly enhanced delivering near instantaneous boost and torque upon demand that really pins you back in your seat. So whether you are roaring down the drag strip, towing a trailer, hauling a heavy load, or taking the family cross-country our TVS2300 supercharger will give you the torque and horsepower when you need it.
Industry-leading Intercooler Performance
Inside of the supercharger manifold, a large liquid-to-air intercooler keeps your Intake Air Temperatures in check and provides consistent and repeatable performance. Combine that with the front-mounted heat exchanger, electric water pump, and intercooler coolant reservoir and you have a supercharger system with IATs that are typically only 20-40 degrees (Fahrenheit) over the ambient temperature.
Bypass valve for fuel economy – horsepower without compromise
Maximizing your efficiency during cruising is the job of the supercharger’s integrated bypass valve. This vacuum operated system allows air to bypass the supercharger and the rotors to “free-spin” under light engine loads. During this situation the parasitic loss of the supercharger system is essentially negated taking less than one-third of a horsepower to turn the rotors. This bypass valve also allows your supercharged vehicle to maintain stock-like drivability and fuel economy – giving you a package that delivers power without compromise.
Down to the smallest part, our bolt-on supercharger systems are engineered as a complete package.
The supercharger, supercharger intake manifold, inlet, pulley, fuel injectors, fuel rails, front & rear fuel crossovers, and intercooler come pre-assembled to make installation simple and easy while the accessory box is organized into individual sub-assemblies to help ensure that you don’t lose track of parts in the middle of your install. All of the hardware needed for a full and complete install is also included so you won’t be running to the local parts store in the middle of your installation. In addition, our full color, step-by-step Installation Manuals will walk you through the install process with exacting attention to detail.
OEM level reliability
Magnuson’s TVS2300 supercharger utilizes EATON’s latest 6th Generation TVS rotor technology found in such industry leading performance vehicles as the Corvette ZR-1, the Cadillac CTS-V, and the Mustang GT500. These Twin Vortices Series Superchargers feature a pair of four-lobe, high-helix rotors with 160-degrees of overall twist that are housed in Magnuson’s patented high-flow housing. This highly efficient package requires less power to drive, delivers cooler discharge temperatures, and is much quieter than many of its competitors. These superchargers are all manufactured in our TS16949 certified facility – the highest ISO OEM quality certification standard in the market.
- See Warranty page for further information
- Sealed supercharger rotor assembly requires no maintenance or oil change
- CARB EO# D-488-47
- Metric wrench set
- 1/4in. – 3/8in. and 1/2in. drive metric socket set (Standard and Deep)
- 3/8in.and 1/2in. drive foot-pound and inch-pound torque wrenches
- Belt tensioner wrench
- Phillips and flat-head screwdrivers
- 1/2in. breaker bar
- Fuel line quick disconnect tool (included in kit)
- Small or angled 3/8in. drill
- Drain pan
- Hose cutters
- Hose clamp pliers
- Safety glasses
- Torque angle meter
- Compressed air
- Blow gun air tool
- Metric Allen socket set 3/8in. drive
- Shop vacuum cleaner
- Blue Loctite
- Right Angle drill for pinning crank pulley (when required)
- Helpful Tool: Air or electric impact wrench
Average Installation Time
- 6-8 Hours
- 2014 Chevrolet Silverado
- 2015 Chevrolet Silverado
- 2016 Chevrolet Silverado
- 2017 Chevrolet Silverado
- 2018 Chevrolet Silverado
- 2014 GMC Sierra
- 2015 GMC Sierra
- 2016 GMC Sierra
- 2017 GMC Sierra
- 2018 GMC Sierra